Air Suction Seeder 2BQ-8 Row Seeder
The angle of the seed tube is reasonable, which realizes precise hole sowing. Four-link profiling structure, single-body ground pressure spring adjustment, consistent sowing depth.
Product Description
Air Suction Seeder-2BQ-8
Technical Specification：
|
Model Number |
2BQ-8 |
|
Size(mm) |
2510×5250×1500 |
|
Structure type |
Pneumatic;Suspension |
|
Supporting power range |
≥132.3KW |
|
Line-width (mm) |
400-650 |
|
Operating efficiency |
3.0-4.1 |
|
Operating Line |
8 |
|
Seed Box/Fertilizer box |
36*8/380*2 |
|
Transmission mechanism Type |
Universal joint drive Chain drive |
|
Furrow opener Type |
Seed Box:Disc Type Fertilizer Box:Shovel Type |
Air Suction Seeder is a type of agricultural machinery used for planting seeds in rows with high precision. It uses a combination of air suction and mechanical components to ensure that seeds are picked up individually and placed accurately into the soil.
Technical Feature：
1.High sowing accuracy and high working reliability. By replacing different seed discs, different seeds can be sown.
2.The seeding tube has a reasonable angle, which enables precise hole sowing. The four-link contour structure and single-body ground pressure spring adjustment ensure consistent sowing depth.
3.The furrow opener is made of boron steel and has a bow plate. It has a wide range of row spacing adjustment and can achieve flat and ridge cultivation. The high-speed and high-volume fan can meet the air volume requirements of up to 24 rows.
4.Enlarging the fertilizer box improves sowing efficiency and reduces fertilizer adding time. The impeller of the fertilizer dispenser is made of imported rubber material, which has a long service life and is corrosion-resistant. The fertilizer amount can be easily controlled by adjusting the handle.
Maintenance methods:
(1) Before the seeder is put into operation, oil should be added to each oiling point in time to ensure that the moving parts are fully lubricated. Lost or damaged parts should be replenished, replaced and repaired in time. Be careful not to apply oil to the gears and chains to avoid sticking with mud and increasing wear.
(2) The working length of each seed wheel is equal and the displacement is consistent. The sowing amount adjustment mechanism is flexible and there should be no sliding and empty movement.
(3) The disc opener rotates flexibly and should not shake or rub against the opener body.
(4) Before and after each shift and during work, the soil on all parts should be cleaned up, and special attention should be paid to removing the soil and oil on the transmission system.
(5) The fertilizer in the fertilizer box should be cleaned up after each shift to prevent the fertilizer from corroding the fertilizer box and the fertilizer discharge part. Check whether the seed discharge shaft and fertilizer discharge shaft are flexible.
(6) After each shift, the seeder should be parked in a dry and covered shed. When parked in the open air, the seed and fertilizer box should be covered tightly. When parking, drop the furrow opener and lower the support to stabilize the machine body, so as to reduce unnecessary load on the frame of the seeder.
Speed Width:
The operating speed of the grain drill is generally 10-12 km/h, and some models can reach 15-16 km/h; the width of a single machine is generally 6-7 meters.
The operating speed of the hole seeder is generally 8-10 km/h, and some models can reach 11-12 km/h; the width of a single machine is generally 6-9 meters (8-12 rows), and some models can reach 12 meters (16 rows).
In order to increase the width of the unit, 3-5 seeders can also be connected in parallel, so that the total width of the grain drill unit reaches 12-15 meters, or even wider.
