Economical GP6020 Horizontal Spline Milling Machine

GP6020 semi-automatic spline shaft milling machine is designed to process straight-slot long spline shaft through hobbing. It can also be used to process straight gear shaft.

Product Description

Major Functions of the Machine Tool

GP6020 semi-automatic spline shaft milling machine is designed to process straight-slot long spline shaft through hobbing. It can also be used to process straight gear shaft.

Major Performance and Structural Features of the Machine Tool

This machine, by applying electrical hydraulic control, could realize semi-automatic one-time work cycle, automatically completing the following action: Rapid approaching of milling head; vertical cutting of the slide; rapid return of the milling head; rapid return of the slide

The machine has a mechanism that could eliminate the gap between feed screws and nuts, and perform hydraulic control against tensioned workpiece at down milling tailstock

1. Lathe Bed

The lathe bed is a rectangular box with sufficient rigidity. On the left side of the bed locate the electrical box, the main motor and the fast motor. On the right side of the bed locates the hydraulic control equipment. The cooling pump motor and coolant tank are located in the middle of the hydraulic oil bath.

2. Lathe Head

The lathe head is equipped with the components of the index feed rapid transmission mechanism. Open the rear door of the lathe head, there is the exchange hanging wheel for milling cuter speed indexing and feeding. Its major function is to transmit the indexing movement to workpiece supporting workpiece, transmit the feeding movement to the feed screw and transmit the milling cutter rotary movement to the feed rod.

MAIN SPECIFICATIONS

Maximum processing diameter	200mm
Max. Module of the processed teeth	8mm
Max. gradient angle of the teeth of the processed gear wheels	±45
Maximal length of splines to be installed	2500 mm
The maximum Diameters of gears to be Treated	500mm
Maximum Processing length of splines	2300mm
The number of processed spline teeth	4-50
Milling cutter speed Grade	P6
The milling cutter speed range	50-160rpm
The Grade of feeding	12
Feeding range from	0.41-2.97 RPM
distance between the workpiece center and center of hob	50-165mm
Maximum Diameter of installed milling cutter	130mm
Maximum Installation length of milling cutter	110mm
Tool arbors	ø 27 mm ø 32 mm ø 40 mm
Taper of main shaft hole of milling cutter	Morse No. 4
Workpiece spindle sleeve taper	Morse No. 5
Taper of tail frame sleeve hole	Morse No. 5
Axial Movement of milling cutter spindle	40mm