Foam Insulation Crosslinked Closed Cell XPE Foam with Aluminum Foil and Adhesive

ulation Crosslinked Closed Cell XPE Foam with aluminum foil on two sides

Basic specification:
1.Foil + XPE Foam + AL foil
2.Size:1.2M width* 40M length,also sizes available upon requests
3.Anti-flaming heat insulation
4.Light,dustfree,fire-retardant,Environmental
Thermal insulation XPE foam foil sound insulation for roof , attac, floor, AC duct / air condition use/ soundproof / waterproof
Good pliability

CYG XPE FOAM rubber insulating products with good flexibility make them suitable for bent and irregular pipes in construction, saving both labor force and cost.

Vibration Resistance
CYG XPE FOAM heat-proof and heat-preservation plastic-rubber with high elasticity ,can reduce the vibration and resonance of the hot /cold water pipes utmost.

Good fire-blocking
This product has fire-blocking and smoke-reducing property , when burned , its density is very low and doesn't melt, without any small fire ball left and with the merit of self-extinguishing.

According to the standard of GBB8624-1997 Method for grading flammability of construction material, this is the flame resistant product of grade B1 enabling to secure the satiety.
Low conductivity factor
Conductivity of this material is 0.034w/mk at an average°C.As this product has high heat-releasing ratio, it can get the same heat-preservation effect at less half thickness of other insulating product under the same. condition, saving not only space but also cost.

SPECIFICATION: ( CAN PRODUCE AS CUSTOMER REQUEST )
3MM X 1.25M X 40M / 3MM X 1.35M X 40M
4MM X 1.25M X 40M / 4MM X 1.35M X 40M
5MM X 1.25M X 40M / 5MM X 1.35M X 40M
6MM X 1.25M X 40M / 6MM X 1.35M X 40M
7MM X 1.25M X 40M / 7MM X 1.35M X 40M


Features of XPE Insulation Material
1. Light weight, clean, good flexibility and cushioning;
2. Invariable if it is attacked repeatedly;
3. Low thermal conductivity and superior heat insulation;
4. Outstanding safety and environmentally friendly;
5. Easy to install, high efficiency;
6. Cost effective and versatile.


XPE foam foil padded heat insulation material:
This is a new environmentally-friendly heat insulation material, which is soft, light and easy to install. It is made of aluminum foil and polyethylene by special machinery. It has a high performance, foil-faced, noise barrier, offering superior acoustic transmission loss and low spread of flame surface covering.
It has great sound resistant ability for the wall, and also no odor and toxicity; It not only overcomes the discomfort and environmental damage brought by glass fiber and epispastics materials, but can also resist ultraviolet radiation that can penetrate through sheet iron, concrete, wood and other heat insulation materials.
This new heat insulation material not only has good insulation, heat reflection & insulation and anti-radiation functions, but also has good moisture-barrier, heat-preservation and energy-saving functions in housing construction (roof, wall. And floor).

Function:
Inside cavities or over lightweight wall, ceiling and floor constructions. Ideal for home theatres, office partitions, meeting rooms.
Over roof joists to reduce aircraft, rail and traffic noise.
Applied between the plenum chamber of a floor slab, roof and adjoining partition walls.
Installed around the outside of metal air ducts to reduce noise break-out.
Wrapped around noisy pipes, e. G. Fluid or gas pulsation in chemical, petrochemical and waste water treatment plants.
Wrapped around valves and fan casings.
Rail carriages for under floor insulation to reduce track and braking noise.

Application of XPE Insulation Material
1) Roof,wall,floor for heat insulation and thermal insulation;
2)Shells of air conditioner and water heater;
3)Protective coatings of water pipe and ventilating pipe;
4)Machinary packing;
5)Making ice package

Density	200±30	125±15	100±10	66.7±8	50±6	40±4	33.3±3
Hardness	60-70	50-60	45-50	35-45	30-35	2-30	18-25
Water absorption (23°C 24h)g/cm³	≤0.02	≤0.02	≤0.03	≤0.03	≤0.04	≤0.04	≤0.05
Thermal conductivity	≤0.092	≤0.082	≤0.07	≤0.062	≤0.053	≤0.047	≤0.041
Tensile strength(mpa)	L	≥1.35	≥1.12	≥0.88	≥0.68	≥0.39	≥0.33	≥0.25
	M	≥1.08	≥0.89	≥0.71	≥0.56	≥0.33	≥0.25	≥0.20
Tesibility	L	≥260	≥230	≥210	≥190	≥170	≥160	≥140
	M	≥220	≥200	≥185	≥170	≥150	≥135	≥130
Tearing strength	L	≥5.90	≥4.80	≥3.60	≥2.80	≥1.80	≥1.60	≥1.35
	M	≥7.10	≥5.40	≥4.00	≥3.30	≥2.30	≥2.00	≥1.70