With Yuchai engine, four-wheel drive, enhanced TS chassis, 15-inch independent double-acting clutch, 32+32 speed synchronizer shift, PTO540/1000 RPM, double pressure lifter, fornt wheel 16.9-28/ rear wheel 20.8-38.
Product Description
Tractors TG Series
How to choose a satisfactory tractor?
1. Observe the operation of the tractor on the spot
Pay more attention to the tractors operating locally, observe the operation on the spot, and understand the actual operation.
2. Selection of tractor horsepower
The trend of tractor horsepower is very obvious. The 1804, 2004, and 2204 models are becoming more and more popular and are becoming the mainstream, but the specific models purchased should be combined with the local actual situation and adapted to the local fields and operation projects: the size of the tractor should be adapted to the size of the local fields, the concentrated and continuous situation, and the specific operation projects. If the fields are flat, large, with small height differences, deep loosening and plowing, a larger model should be selected; if the fields are small and scattered, small and medium-sized tractors should be selected. Otherwise, the efficiency of large tractors cannot be fully utilized, and the productivity of small tractors is low, which not only wastes fuel but also cannot meet the requirements of fast operation during the busy farming season.
3. Selection of tractor chassis size
Tractors with the same horsepower can be divided into large bridges, medium bridges, and small bridges. If you are doing heavy-load traction operations, you must choose a large bridge vehicle, otherwise the chassis part is prone to problems; if you are doing medium-light load operations, you can choose medium-small bridge vehicles. The simplest and most effective way to distinguish large and small bridge vehicles is to look at the minimum use quality.
4. Selection of tractor four-wheel drive and two-wheel drive
Tractors can be divided into four-wheel drive and two-wheel drive. Four-wheel drive means four-wheel drive. Its front wheels can also be driven. The obvious difference is that the front tire pattern is the same as the rear tire pattern, and the front tire is larger than the front tire of the two-wheel drive. The front drive cannot be engaged during normal walking, otherwise it will cause tire chewing. The front drive can only be engaged on soft ground and heavy-load traction operations. Generally, the front drive is very effective when engaged during ploughing. The four-wheel drive can increase the friction of the tire on the ground and reduce slippage, ploughing quickly and reducing fuel consumption. If the two-wheel drive is used for ploughing, the tire will slip severely and increase fuel consumption. The fuel consumption of two-wheel drive and four-wheel drive of the same brand horsepower is not much different, but the vehicle weight of four-wheel drive is heavier than that of two-wheel drive, and the price is also more expensive than that of two-wheel drive. If you need assistance in finding specific models of 4 Wheel Drive Tractors For Sale, comparing prices, or learning more about their features, feel free to ask!
5. Selection of tractor PTO speed
Using tractor PTO to drive agricultural implements for operation is one of the most widely used forms on tractors, such as rotary tillage, straw return to the field, and powered harrows, but there are often a series of problems such as unreasonable matching of agricultural implements, low operating efficiency, poor operating results, failure to enter the soil, and inability to pull due to speed mismatch, so the selection of PTO speed is very important. The tractor PTO speeds are: 540rpm, 1000rpm, 760rpm (720rpm, 760rpm, 850rpm, etc.) and synchronous speed. 540rpm and 1000rpm are international standards and national standards, and 760rpm (720rpm, 760rpm, 850rpm, etc.) is the manufacturer's standard. The PTO speed on domestic medium and large horsepower tractors is generally dual-speed, and the dual-speed power output is: 540/1000rpm, 540/760rpm, 760/1000rpm, 760/850rpm, etc. In actual use of PTO speed, the PTO speed of 1000rpm is generally used less, so when choosing the PTO speed, 540/760rpm or 760/850rpm is generally selected.
Technical Specification:
Model |
TG2204 |
TG2404 |
TG2604 |
||
Horsepower (HP) |
220 |
240 |
260 |
||
Type |
Wheel Tractor |
||||
Wheel Driver |
4WD |
||||
Tyre Size (F/R) |
16.9-28/20.8-38 |
||||
Engine Brand |
Yuchai |
||||
PTO Speed (r/min) |
540/1000 or 760/1000 or 760/850 |
||||
Front wheel tread (mm) |
1720/1820/2050/2100 |
||||
Rear wheel tread(mm) |
1680-2380(Steplessly adjustable) |
||||
F/R Counterweight(kg) |
350/240;440/160 |
||||
Gear Shifts |
32F+32R |
||||
Max speed (km/h) |
36 |
37 |
37.5 |
||
Mini clearance (mm) |
400 |
||||
Max traction(KN) |
67 |
70 |
|||
Max lifting force(KN) |
55 |
||||
Wheel base (mm) |
2930 |
||||
Weight(kg ) |
7900 |
||||
Fuel Tank (L) |
450 |
||||
Working dimensions(L*W*H)(mm) |
5700*2800*3350 |
Technical Feature:
1. Chassis suitable for 220-260 horsepower.
2. 332+32 gear shift, one lever to switch forward and backward, easy and fast operation.
3. High-strength rear axle, thick half-tube shell.
4. Four-wheel drive, better braking performance, more stable.
5. 450L fuel tank, long operating time.
6. Equipped with Yuchai engine with strong power.
Advantage:
With Yuchai engine, four-wheel drive, enhanced TS chassis, 15-inch independent double-acting clutch, 32+32 speed synchronizer shift, PTO540/1000 RPM, double pressure lifter, fornt wheel 16.9-28/ rear wheel 20.8-3 8, four sets of hydraulic output, the front weight of 15 pieces 74 kg/piece, after the weight of a layer of 240 kg.
Sign In